7 Tips to Pass Your Mobile Roadworthy Logan Inspection on the First Try
If you're planning to sell your vehicle, register it, or transfer ownership in Queensland, getting a Roadworthy Certificate (RWC) is essential. At Sunshine Roadworthy, we understand that failing an inspection can delay your plans and lead to costly repairs. The good news? A little preparation can go a long way.
Here are 7 simple but effective tips to help you pass your mobile roadworthy Logan inspection on the first attempt:
Check Your Tyres Thoroughly:
Your tyres are one of the first things an inspector will check. Make sure they have:
· At least 1.5mm tread depth across the entire surface.
· No bulges, cracks, or cuts.
· Even wear and proper air pressure.
Don’t forget to check your spare tyre too. If any of your tyres fail to meet safety standards, your vehicle won’t pass the roadworthy certificate Logan inspection.
Test All Lights and Indicators:
Functioning lights are critical for safe driving. Ensure the following are working correctly:
· Headlights (high and low beam)
· Tail lights
· Brake lights
· Reverse lights
· Number plate light
· All indicators and hazard lights
Replace any broken bulbs and clean the lenses for better visibility. Faulty lighting is one of the most common reasons for RWC failure.
Inspect Your Brakes:
Your brakes must be responsive and meet minimum standards. Here’s what to look for:
· No squealing, grinding, or pulling to one side
· Brake pedal doesn’t feel spongy
· Parking brake holds the vehicle securely
· If you're unsure, get a quick check or brake service before scheduling your inspection.
Ensure Windscreen & Wipers Are in Good Condition:
Your windscreen should be:
· Free from major cracks or chips, especially in the driver’s view
· Equipped with functional wipers that provide clear visibility
· Top up your washer fluid and test the spray and wipe action. Poor visibility is a red flag for inspectors.
Secure Seatbelts and Safety Features:
All seatbelts must:
· Retract properly
· Lock in place
· Show no signs of fraying or damage
Inspect all seats, seatbelt latches, and child restraint anchor points. These safety features must function as intended to ensure mobile roadworthy Logan pass.
Check for Fluid Leaks:
Inspect under your car and in the engine bay for any signs of leaks:
· Oil
· Coolant
· Transmission fluid
· Brake or clutch fluid
Leaks are not only a safety concern but can also damage other vehicle parts. If you notice any puddles or drips, get them fixed before the inspection.
Keep Your Vehicle Clean and Presentable:
This might sound simple, but a clean vehicle gives a good first impression. Remove clutter from the interior and boot, clean the windows, and give the car a basic wash. Inspectors will appreciate a tidy vehicle, and it helps them do their job more efficiently.
Bonus Tip: Get a Pre-Inspection Check
We recommend a quick pre-inspection if you're unsure about your vehicle’s condition. Our mobile mechanics can guide you through any necessary repairs before the official car roadworthy Logan test.
Why Choose Sunshine Roadworthy?
· Mobile Inspections at Your Location
· Same-Day Appointments Available
· Experienced & Licensed Inspectors
· Transparent Reporting and Advice
· Servicing Brisbane, Logan, Ipswich & Beyond
Whether you're buying, selling, or simply updating your registration, our team ensures your vehicle meets Queensland’s roadworthy standards—without the stress.
Passing your car road worthy Logan inspection on the first go isn’t about luck—it’s about preparation. By following these 7 tips, you’ll not only improve your vehicle’s safety but also save time and money.
If you're ready to book a car RWC inspection, trust the professionals at Sunshine Roadworthy. We come to you—fast, friendly, and fully equipped.
Drive safe, stay legal, and let us help you hit the road with confidence. Getting your RWC now is easier than ever!
