Top 5 Signs Your Vehicle Might Fail A Mobile Roadworthy Logan Inspection
If you plan to sell your car or re-register it in Queensland, getting a mobile roadworthy Logan is essential. However, many vehicles fail their initial inspection due to issues that could have been addressed beforehand. At Sunshine Roadworthy, we’ve seen it all and want to help you avoid common pitfalls. Below are the top five signs your vehicle might fail a roadworthy inspection, along with some valuable tips to stay ahead.
1. Worn-Out Tyres:
Tyres are one of the most frequent reasons for inspection failure. If your tyres have uneven wear, low tread depth (less than 1.5mm), or visible cracks and bulges, they will not pass.
Tip: Check the tread depth using a 20-cent coin. If the tread doesn’t reach the bill of the platypus, it’s time for a replacement.
2. Brake Issues:
Brakes are a critical safety component. If you notice your car pulling to one side when braking, hear grinding noises, or your brake pedal feels spongy, your vehicle may not pass.
Tip: Have your brakes professionally inspected before the RWC check, primarily if they haven’t been serviced recently.
3. Suspension and Steering Problems:
Worn suspension parts or loose steering components can be a big red flag. Signs include excessive bouncing, clunking noises over bumps, or difficulty steering.
Tip: Check the suspension before booking your inspection if your car is unstable or leans excessively when turning.
4. Faulty Lights and Indicators:
Non-working headlights, brake lights, or indicators can lead to an automatic failure. Faded lenses and incorrect bulb colours can also cause this.
Tip: Before your mobile roadworthy Logan inspection, walk around your car and test all lights. Replacing bulbs is usually an easy fix.
5. Windscreen Damage and Wiper Issues:
Chipped or cracked windscreens—especially in the driver’s line of sight—can be a reason for failure. Faulty wipers that don't clear the windshield properly are also problematic.
Tip: Inspect your windscreen for cracks and test your wipers on a rainy day to ensure they clear the screen effectively.
6. Oil or Fluid Leaks:
Any visible oil or fluid leak (engine oil, transmission, brake fluid, etc.) can lead to a failed inspection. Leaks pose both mechanical and environmental risks.
Tip: Check under your car regularly for wet spots or oily marks. If you notice any leaks, have a mechanic diagnose and repair the issue before your inspection.
A roadworthy certificate Logan isn’t just a formality—it ensures your vehicle is safe for the road. Addressing these common issues can save you time, money, and frustration.
Need a hassle-free and professional inspection? We offer mobile roadworthy Logan and the surrounding areas, bringing convenience and reliability to your doorstep. Call us today to book your inspection and easily get your vehicle road-ready.
Comments
0 comment