Pneumatic Actuated Ball Valve Manufacturer in India
Speciality Valve is the largest Pneumatic Actuated Ball Valve Manufacturer in India. It is a type of valve that uses compressed air to control the opening and closing of the valve. It combines a ball valve with a pneumatic actuator to provide automatic control, making it suitable for applications requiring rapid or frequent on/off control.
How It Works
The ball valve consists of a spherical ball with a hole through its center, which aligns with the pipeline when open and blocks the flow when closed. The pneumatic actuator is responsible for rotating the ball valve. When compressed air is supplied to the actuator, it moves a piston inside, which in turn rotates the valve’s ball. The actuator’s movement can either open or close the valve depending on its design, and it can be controlled remotely via electrical or manual signals.
Main Components
Pneumatic Actuator: This is the key component that converts compressed air into mechanical motion to operate the valve. It is often a piston or diaphragm type.
Ball Valve: A valve with a spherical ball inside it, which can rotate to either block or allow the flow of media through the pipe.
Control System: A set of sensors or controllers that govern when to activate or deactivate the actuator based on the desired flow control.
Spring: In many designs, a spring returns the valve to its default position (either open or closed) when no air pressure is applied.
Positioners and Feedback Systems: These ensure that the valve opens or closes to the required degree of precision.
so whenever you need of these type of valve then connect with us as Pneumatic Actuated Ball Valve Manufacturer in India
Benefits
Quick Response Time: Pneumatic actuators offer fast opening and closing, ideal for processes that require rapid control.
High Reliability: Pneumatic systems are less prone to failure in harsh environments compared to electrical systems.
Cost-Effective: Compressed air is often cheaper and safer than electrical power sources.
Safety: Pneumatic systems can fail in a "safe" state (fail-open or fail-close), reducing the risk of hazardous situations.
Uses & Industries
It used in industries where automated control of flow is needed, including:
Oil & Gas: For controlling the flow of fluids and gases in pipelines.
Water Treatment: For regulating water flow in various treatment processes.
Chemical Processing: To handle corrosive or high-pressure fluids.
Pharmaceuticals: For precise, clean, and sanitary fluid control.
These valves are integral to many automated systems where high performance and reliable operation are crucial.
Description:
Body Material: Cast steel (WCB, WCC, WC6, LCC, LCB), Stainless steel (SS304, SS316), Carbon steel(CF8, CF8M),
Class: 150 to 2500; PN10 to PN450
Size: ½” to 4”
End: Buttweld, Flanged, Socket weld, Threaded
Operation: Pneumatic actuated ball valve
Configuration of a Pneumatic Actuator:
4-20 amp
Pneumatic single acting actuators
Pneumatic double acting actuators
Pneumatic rotary actuators
Pneumatic Scotch and Yoke actuators
Pressure: 228 bar
Temperature:
Standard -4°F to 200°F (-20°C to 93°C)
Low -40°F to 176°F (-40°C to 80°C)
High 0°F to 300°F (-18°C to 149°C)
Visit on - https://www.specialityvalve.com/product-category/pneumatic-actuated-ball-valve/
Comments
0 comment