How to Reset and Reconfigure Your Linksys Extender?

Learn What is a Linksys WiFi Extender?

Linksys WiFi extender is a tech gadget to boost internet WiFi signal with respect to speed & range. It gets the internet signal from your primary router and sends it to various parts of your house.

Why Reset Your Linksys Extender?

Sometimes your extender may stop working properly. This can happen due to:

• WiFi password changes

• Router settings updates

• Network signal problems

• Extender not placed properly

When this happens, the best option is to reset the extender and set it up again. This is called reset and reconfigures Linksys extender.

Things You Need Before You Start

Before you begin, make sure you have:

• Your Linksys extender

• A mobile phone, laptop, or computer

• Your WiFi name (SSID) and password

• Power supply for the extender

Step 1: How to Reset the Linksys Extender

Resetting the extender means erasing all old settings and returning it to factory mode.

Learn steps:

1. Turn ON extender device using a convenient power outlet.

2. Wait for the power light to become stable.

3. Look for the small reset hole or button.

4. Push reset button for 15 seconds.

5. Release it once the light starts to flash.

Now, the extender will restart and go back to factory settings.

This is the first step to reset and reconfigure Linksys extender.

Step 2: Connect to the Extender

Once reset, the extender will create its own temporary WiFi signal.

Follow these steps:

1. Open your phone, laptop, or computer.

2. Go to WiFi settings.

3. Connect to the Linksys Extender Setup network.

   • It may look like Linksys Extender Setup – xxx.

No password is needed for this network.

Step 3: Open the Setup Page in Browser

Now it’s time to reconfigure Linksys WiFi extender.

1. Use a Web Browser

2. Enter the web interface link: extender.linksys.com or IP Address: 192.168.1.1 into the address bar.

You will now see the Linksys setup page.

Step 4: Start the Setup Process

On the setup page:

1. Click on Start Setup or Manual Setup.

2. The extender will scan for nearby WiFi networks.

3. Select your main WiFi network from the list.

4. Enter your WiFi password (same as your main router).

5. Choose whether you want the extender to have the same network name or a different one.

6. Click Next to continue.

The extender will now connect to your router.

Step 5: Place the Extender in the Right Spot

After setup:

1. Unplug the extender and move it to a place between the router and the area with weak signal.

2. Plug it in and wait for the light to become solid green or blue.

This means the connection is strong and working well.

Step 6: Check Connection

1. Use your phone or laptop to connect to the extender WiFi.

2. Try opening a website or app.

3. If the internet works fine, the setup is successful.

You have now completed the reset and reconfigure Linksys extender process. If you have issues after these steps, then ensure that you are not forgetting any step during Reconfigure Linksys WiFi extender.

Tips to Get the Best WiFi Signal

• Do not place the extender near walls or metal objects.

• Keep it away from microwave ovens and cordless phones.

• Make sure the extender light is green or blue for best performance.

• Reboot the extender once a week for smooth internet.

Final Words

You can fix problems with your internet that are slow or don't reach all places by resetting and setting up your extender again. It only takes 10 to 15 minutes to reset and set up a Linksys extension. You can do it on your computer or phone.

You can have fast, stable WiFi in every room of your house if you follow the steps in this guide. For the best results, don't forget to put your extension in the right spot.