NVIDIA Jetson Camera Pinout: Get the Connections Right for Your MIPI CSI-2 Camera

Introduction
Setting up a camera with NVIDIA Jetson camera pinout boards like Nano, Xavier NX, or Orin begins with one crucial step—getting the camera pinout right. Whether you're working on a robotics project, building a custom imaging setup, or developing computer vision applications, correct pin connections ensure your MIPI CSI-2 camera communicates properly with the Jetson module.

What Is the NVIDIA Jetson Camera Pinout?
The camera pinout refers to how each wire or signal line connects between the Jetson board and your MIPI camera. These include signals for power, ground, clock, and data lanes. A mismatch in these connections can result in the camera not working or causing unstable behavior.

Types of Jetson Connectors
Jetson boards come with two main types of camera connectors:

• 15-Pin Connector – Found on Jetson Nano and Xavier NX, this connector supports 2-lane MIPI CSI-2 cameras.

• 22-Pin Connector – Used on Jetson Orin and other newer models, this connector supports up to 4 data lanes, allowing for higher bandwidth and resolution.

Why Pinout Accuracy Matters
Every signal has a specific role. Power must be routed correctly to avoid damaging components. Clock and data signals must be in the right order so that the image sensor and processor can communicate. If even one pin is misaligned, it can cause the system to fail during initialization or lead to erratic video capture.

Using Vadzo Camera Interface Boards
To simplify integration, Vadzo offers dedicated camera adapter boards tailored to each Jetson model:

• A 15-pin board compatible with Nano and Xavier NX for standard imaging setups.

• A 22-pin board that supports high-performance cameras on Jetson Orin.

These boards are made to match NVIDIA’s official specifications and reduce the risk of wiring errors.

Common Mistakes to Avoid

• Plugging a 22-pin camera into a 15-pin interface

• Mixing up data lane order

• Ignoring power supply requirements

• Using an unsupported cable or adapter

Each mistake can delay your project or damage your hardware. Always double-check pin mappings and compatibility before powering on.

Conclusion
Working with NVIDIA Jetson camera pinout boards and MIPI CSI-2 cameras requires careful attention to camera pinout details. With the right connections and tools, you can build a stable and reliable imaging system. If you're looking to avoid guesswork and save setup time, using Vadzo’s camera interface boards can help you connect your hardware the right way from the start.